B.W.R. Grade Plywood
B.W.R. stands for Boiling and Water Resistant Grade Plywood. Our premium quality of B.W.R. confirms to the IS : 303-1989 standardization. It has been manufactured from selected stress and satin free hard wood with in-house manufactured PF resin.
‘Jaguar’ is resistible to extreme weather conditions like heavy moisture content of air, dryness, unbeatable heat, dense fog and all adverse atmospheric changes.
Where can B.W.R. Grade Plywood be Used?
- Automobile frames
- Railways
- Bus coaches
- Kitchen cabinets
- Bathroom furnishing
- Exterior hoardings
- Sign boards
- Dining table tops
Technical Specifications
| Density | Approx. 0.650 kg/m³ |
| Glue Shear Strength(Dry) | Minimum of 135kg.cm² |
| Glue Shear Strength(Wet) (After 8 hours of boiling at 100⁰C) |
Minimum of 100 kg.cm² |
| Moisture Content | 7-12% |
| Bending Strength | |
| Across the grains | 357 – 420kg/cm² |
| Parallel to the grains | 213 kg/cm² |
| Cycle Test in Dry and Wet Conditions (8/hours x 3 cycles) | Passes |
| Standard Thickness (in mm) | 3, 6, 9, 12, 16, 19 |
| Standard Size (in feet) | 8×4′; 8×3′ 7×4′; 7×3′ 6×4′; 6×3′ |